Hi,

This is my first post to SDN. I have tried to search this issue, but was not able to find a resolution so posting it. Hope this time I get it resolved.

I have installed SAP GUI 720 with patch level 8 and copied the saplogon.ini file given by our company's client. However, I am still not able to login to the system.  It is a group server logon.

The error I get is

Logon Balancing error 88:Cannot connect to message server (rc =9),

If I select the detailed error description it says

Error:hostname <the message server name> unknown

I am using Windows XP Professional Ver 2 SP3 on my end

I have copied the port names in the services file in the etc folder and also ensured that there is an extra line in the end.

I also have my desktop system's hardware and IP in the client's network. (We are in India and our company's client is in US)

Any suggestions, what I am missing?

Edited by: raisingh on Feb 14, 2012 5:56 PM

Edited by: raisingh on Feb 14, 2012 6:36 PM

I need to move this post/question to SAP GUI. Not sure how to do that. Would the moderators please move it?

Hi Experts,

The dump MEMORY_NO_MORE_PAGING is due to overload of SAP paging memory.

Short text

    SAP paging overflow when storing data in the ABAP/4 memory.

I have check profile parameter with rz11

rdisp/PG_MAXFS 

Dflt value                32768

ProfileVal                32768

Current value             32768

Al so I am not able to change rdisp/PG_MAXFS parameter in rz10 bcs itu2019s not shown in profile list.

Thanks in advance.

Regards,

Rahul.

Hi Expert,

we are getting the below abap dump  DDIC_TYPE_INCONSISTENCY frequently.

Runtime Errors         DDIC_TYPE_INCONSISTENCY

Date and Time          10.06.2008 12:11:34

What can you do?

     Note which actions and input led to the error.

     For further help in handling the problem, contact your SAP administrator

    You can use the ABAP dump analysis transaction ST22 to view and manage

     termination messages, in particular for long term reference.

Error analysis

     There is an internal system error.

     eliminated with ABAP/4.

How to correct the error

     The internal system error cannot be fixed by ABAP means only.

     You may be able to find a solution in the SAP note system. If you have

     access to the SAP note system, try searching for the following terms:

      "DDIC_TYPE_INCONSISTENCY" " "

      "SAPLMEACCTVI" or "LMEACCTVITOP"

      " "

     If the error occures in a non-modified SAP program, you may be able to

     find an interim solution in an SAP Note.

     If you have access to SAP Notes, carry out a search with the following

     keywords:

     "DDIC_TYPE_INCONSISTENCY" " "

     "SAPLMEACCTVI" or "LMEACCTVITOP"

     " "

     If you cannot solve the problem yourself and want to send an error

     notification to SAP, include the following information:

1. The description of the current problem (short dump)

   To save the description, choose "System->List->Save->Local File

(Unconverted)".

2. Corresponding system log

   Display the system log by calling transaction SM21.

   Restrict the time interval to 10 minutes before and five minutes

after the short dump. Then choose "System->List->Save->Local File

(Unconverted)".

3. If the problem occurs in a problem of your own or a modified SAP

program: The source code of the program

   In the editor, choose "Utilities->More

Utilities->Upload/Download->Download".

4. Details about the conditions under which the error occurred or which

actions and input led to the error.

Please help me to fix this issue.

Thanks & Regards,

Reddy V

Hi Responders!,

Firstly PARDON me if i am posting the thread under the wrong head. Secondly, could you please direct me as to how i can get hold of SAP Gui 7.10 compatible for my Mac OS X (LION).

thanks & regards.

Gnawang

Hi all,

I facing issue in applying the support package. The SAINT giving message "OCS is locked by transaction SPAM. Process all the steps of the transaction SPAM until they are completed.".

On the other hand SPAM is running in display mode due to the lock therefore I am unable to run the transport unless SPAM is unlocked.

Please advise how to get around this issue.

Regards.

Hello All

i want to delete client a from qas server which is the prefer method SCC5 or through OS level

regard

Aftab

Dear SAP  Gurus ,

I have to install oracle 10g on Microsoft windows server 2008 R2 (No HA configuration)

I have gone through documentation that Oracle10g does not support windows server2008 R2(X86_64) and needs minimum 10.2.0.5 version

Since from SAP site i can not see any dump to directly install 10.2.0.5   So i have to first install 10.2.0.4 then upgrade patchset to 10.2.0.5

I am confused from which CD i should start installation as some SDN link and SAP note 1486772says start with 

CD (51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008) But i do not have HA configuration so shall  i use this one or not.

And do i need to download below CDs as some SAP note says that it is not possible to install Oracle 10.2.0.2 and then upgrade it to 10.2.0.4

51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5 

51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5

51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5 

51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5 

51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5 

51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit

So basically which Cds shold i download from SMP to install oracle 10g on Microsoft windows server 2008 R2(x86_64)

Also in Service market place ---> Software downloads-->Date base Patches-->Oracle -->Oracle 10.2.0.5--->Database RDBMS-->MS Windows X86_64(64 Bit)  There are 2 patch files apart from generic patches

10205_Patch12_MSWIN-x86-64.zip

10205_Patch14_MSWIN-x86-64.zip

At Service market place ---> Software downloads-->Date base Patches-->Oracle---> On the right side of screen we can see Oracle 10.2 Software (64-bit)  Installation-->Microsoft windows-->Oracle Database-->There i can see below patches

51040057_4 ORACLE RDBMS Patch 10.2.0.5 Windows Server on x64 64bit 

51041676_4 ORACLE RDBMS Patch 10.2.0.5 Windows Server on x64 64bit

Is their any difference between among two patches.  And which one i should use if i am installing Fresh Oracle10g

Regards

After installing SAP 710 perfectly fine on Windows 7 64bit and putting appropriate single sign on files in correct locations, I get an error when trying to log on. It says "Unable to load the GSS-API.DLL named sncgss32.dll". This exact install works on all other platforms, including Server 2008 64bit. I'm at a loss. Please help. THX

Hi Expert,

we are getting the below abap dump  DDIC_TYPE_INCONSISTENCY frequently.

Runtime Errors         DDIC_TYPE_INCONSISTENCY

Date and Time          10.06.2008 12:11:34

What can you do?

     Note which actions and input led to the error.

     For further help in handling the problem, contact your SAP administrator

    You can use the ABAP dump analysis transaction ST22 to view and manage

     termination messages, in particular for long term reference.

Error analysis

     There is an internal system error.

     eliminated with ABAP/4.

How to correct the error

     The internal system error cannot be fixed by ABAP means only.

     You may be able to find a solution in the SAP note system. If you have

     access to the SAP note system, try searching for the following terms:

      "DDIC_TYPE_INCONSISTENCY" " "

      "SAPLMEACCTVI" or "LMEACCTVITOP"

      " "

     If the error occures in a non-modified SAP program, you may be able to

     find an interim solution in an SAP Note.

     If you have access to SAP Notes, carry out a search with the following

     keywords:

     "DDIC_TYPE_INCONSISTENCY" " "

     "SAPLMEACCTVI" or "LMEACCTVITOP"

     " "

     If you cannot solve the problem yourself and want to send an error

     notification to SAP, include the following information:

1. The description of the current problem (short dump)

   To save the description, choose "System->List->Save->Local File

(Unconverted)".

2. Corresponding system log

   Display the system log by calling transaction SM21.

   Restrict the time interval to 10 minutes before and five minutes

after the short dump. Then choose "System->List->Save->Local File

(Unconverted)".

3. If the problem occurs in a problem of your own or a modified SAP

program: The source code of the program

   In the editor, choose "Utilities->More

Utilities->Upload/Download->Download".

4. Details about the conditions under which the error occurred or which

actions and input led to the error.

Please help me to fix this issue.

Thanks & Regards,

Reddy V

Hi all,

I facing issue in applying the support package. The SAINT giving message "OCS is locked by transaction SPAM. Process all the steps of the transaction SPAM until they are completed.".

On the other hand SPAM is running in display mode due to the lock therefore I am unable to run the transport unless SPAM is unlocked.

Please advise how to get around this issue.

Regards.

Is there a possibility to disable the

sqlplus /nolog

Connect /as sysdba

Due to the fact, that if a person has the possibility to access the Operating System; he will have the opportunity to access the DB withou entering an aditional password. We want to establish levels of security between OS and DB. What are your recommendations? Is it possible to do it? How? If so, what could be the repercussion in the rest of my SAP servers?

I also want to know what could be the steps to change, the password of my oracle users (system, SYS, SAP<sid>) without affecting my sap business processes

Thanks in Advance

Henry

Hi Responders!,

Firstly PARDON me if i am posting the thread under the wrong head. Secondly, could you please direct me as to how i can get hold of SAP Gui 7.10 compatible for my Mac OS X (LION).

thanks & regards.

Gnawang

I was wondering on how to optimize the use of "SAPPFPAR check" in terms of Memory Tuning. Upon typing the command "sappfpar check pf=<profile>", the shared memory disposition overview is being shown. Are the values shown here present the current values defined in the system?

Furthermore, i was wondering what values are shown below? Do all the values shown below display the currently allocated values in the system or are the values shown below display the required value at the very least? If so, how can i change the value? How do i know what parameter these values are directly corresponding to so that i can check and change the said values if necessary? Especially the values shown in the "worst case" field, how can i check whether the currently allocated values satisfy what are indicated in the SAPPFPAR check?

In addition, i was wondering what does the error imply? Does it straightforwardly imply that there are incorrect values existing in the system, or does it imply that requirements are not met, or etc. I would like to know more about this from the SAP practitioners themselves since experience provide the best knowledge that can be taught since it occurred first hand.

Kindly enlighten me on this topic. Thanks.

Edited by: Jett Michael Contreras on Apr 22, 2008 11:36 AM

Hello Gurus,

we have a problem with connection with SAPOSS, when we test the connection present the following message:

Connection Error

Error when opening an RFC connection

ERROR: sapserv2a: route permission denied (200.30.70.220 to oss001, sapmsOSS)

LOCATION: SAProuter 37.15 on sapserv2a

COMPONENT: NI (network interface)

COUNTER: 5

MODULE:

LINE:

RETURN CODE: -93

SUBRC: 0

RELEASE: 640

TIME: Fri Apr 11 23:54:16 2008

VERSION: 37

-

In the Tx OSS1 we have:

saprouter1

name: server name where saprouter is installed

IP address: LAN IP address where saprouter is installed (is locally intalled)

Instance no. 99

Saprouter at SAP

Name sapserv2

IP Address 194.39.131.34 (ping to this IP response)

instance 99

name oss001

db name o01

instance 01

-

In Tx ST11, dev_lg log file contains:

RSTR0006: Display Developer Traces

trc file: "dev_lg", trc level: 1, release: "700"

[Thr 4780] Fri Apr 11 16:41:16 2008

[Thr 4780] *** ERROR => NiBufIProcMsg: hdl 0 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp    2125]

[Thr 4780] *** ERROR => MsINiWrite: NiBufSend (rc=NIEROUT_INTERN) [msxxi.c      2480]

[Thr 4780] *** ERROR => MsIAttachEx: MsINiWrite (rc=NIEROUT_INTERN) [msxxi.c      734]

[Thr 4780] *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_INTERN) [lgxx.c       3980]

[Thr 4780] *** ERROR => LgApplSrvInfo: LgIAttach(rc=LGEMSLAYER) [lgxx.c       1272]

[Thr 4780]

*****************************************************************************

*

[Thr 4780] *  LOCATION    SAProuter 37.15 on sapserv2a

[Thr 4780] *  ERROR       sapserv2a: route permission denied (200.30.70.220 to oss001,

•              sapmsO01)

[Thr 4780] *

• TIME        Fri Apr 11 23:32:17 2008

[Thr 4780] *  RELEASE     640

[Thr 4780] *  COMPONENT   NI (network interface)

[Thr 4780] *  VERSION     37

[Thr 4780] *  RC          -93

[Thr 4780] *  COUNTER     3

[Thr 4780] *

[Thr 4780] *****************************************************************************

-

dev_rout file in /usr/sap/saprouter contains:

-

trc file: "dev_rout", trc level: 1, release: "700"

-

Fri Apr 11 17:02:21 2008

SAP Network Interface Router, Version 38.10

command line arg 0:     saprouter

command line arg 1:     -r

command line arg 2:     -R

command line arg 3:     ./saprouttab

main: pid = 5504, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)

reading routtab: './saprouttab'

Fri Apr 11 17:02:36 2008

• ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp    2125]

Fri Apr 11 17:03:15 2008

• ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp    2125]

Thanks,

HEPC

Hello Friends,

I am facing one problem related to Spool Request, which is generated through Scheduled Background Jobs (scheduled by funcional people).

The Background Job is having status "completed" when analyzing it. But, its associated Spool Request is showing "waiting" Status, with "Frontend unavailable" as Status Text.

Here is the brief status of that Spool Request.

28448     1      300 USER1 00:00 LP01 X_65_80      Frontend unavailable

in Detail:

Description          Value
Status:              Frontend unavailable
Last event:
Message:             Request on hold
Date:                01.07.2009
Time:                00:00:27
Job status:          On hold
Error class:         Delayed
Area:                Data transfer
Printout:            Not printed

The Setting of LP01 O/Device is as followed:

Output Device        LP01
Device Type        SWIN SWIN  : Windows printing via SAPlpd
Device Class      Standard Printer

Host Spool Access Method       F F: Printing on Front End Computer
Host printer                     __DEFAULT

Moreover, the SAP User USER1 is allocated LP01 as Output Device with "Output Immediately" & "Delete After Output" checked status.

Some Background Jobs are showing the same status for this LP01.

I have a doubt on allocated O/P Device LP01.

Any Clue for this issue ?

Regards,

Bhavik G. Shroff

Hi all,

I facing issue in applying the support package. The SAINT giving message "OCS is locked by transaction SPAM. Process all the steps of the transaction SPAM until they are completed.".

On the other hand SPAM is running in display mode due to the lock therefore I am unable to run the transport unless SPAM is unlocked.

Please advise how to get around this issue.

Regards.

Dear SAP  Gurus ,

I have to install oracle 10g on Microsoft windows server 2008 R2 (No HA configuration)

I have gone through documentation that Oracle10g does not support windows server2008 R2(X86_64) and needs minimum 10.2.0.5 version

Since from SAP site i can not see any dump to directly install 10.2.0.5   So i have to first install 10.2.0.4 then upgrade patchset to 10.2.0.5

I am confused from which CD i should start installation as some SDN link and SAP note 1486772says start with 

CD (51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008) But i do not have HA configuration so shall  i use this one or not.

And do i need to download below CDs as some SAP note says that it is not possible to install Oracle 10.2.0.2 and then upgrade it to 10.2.0.4

51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5 

51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5

51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5 

51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5 

51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5 

51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit

So basically which Cds shold i download from SMP to install oracle 10g on Microsoft windows server 2008 R2(x86_64)

Also in Service market place ---> Software downloads-->Date base Patches-->Oracle -->Oracle 10.2.0.5--->Database RDBMS-->MS Windows X86_64(64 Bit)  There are 2 patch files apart from generic patches

10205_Patch12_MSWIN-x86-64.zip

10205_Patch14_MSWIN-x86-64.zip

At Service market place ---> Software downloads-->Date base Patches-->Oracle---> On the right side of screen we can see Oracle 10.2 Software (64-bit)  Installation-->Microsoft windows-->Oracle Database-->There i can see below patches

51040057_4 ORACLE RDBMS Patch 10.2.0.5 Windows Server on x64 64bit 

51041676_4 ORACLE RDBMS Patch 10.2.0.5 Windows Server on x64 64bit

Is their any difference between among two patches.  And which one i should use if i am installing Fresh Oracle10g

Regards

Hello All

i want to delete client a from qas server which is the prefer method SCC5 or through OS level

regard

Aftab

Hi Techies,

I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with out DB option, Installation completed successfully.

URL testing Information

http://uat-sapcnt01.fmguat.local:1090/ContentServer/ContentServer.dll?serverInfo

serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus="running";serverStatusDescription="";serverDate="2010-06-16";serverTime="14:56:15";startUpDate="2010-06-16";startUpTime="14:19:17";lastAccessDate="2010-06-16";lastAccessTime="14:55:23";

However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 405 Method Not Allowed'.

My settings are as follows

On Content server I give full permission to content Rep directory

On IIS I have allowed Unspecified CGI & ISAPI modules.

On Web DAV Authoring Rules, I have given permission read, write and source and allow All content, All users

Is Win 2008 R2  and MS IIS 7.5 is compatible with SAP Content Server 6.40

Please suggest, how to resolve this issue.

Thanks

Rehan Manzoor

Is there a possibility to disable the

sqlplus /nolog

Connect /as sysdba

Due to the fact, that if a person has the possibility to access the Operating System; he will have the opportunity to access the DB withou entering an aditional password. We want to establish levels of security between OS and DB. What are your recommendations? Is it possible to do it? How? If so, what could be the repercussion in the rest of my SAP servers?

I also want to know what could be the steps to change, the password of my oracle users (system, SYS, SAP<sid>) without affecting my sap business processes

Thanks in Advance

Henry